Español
العربية
Francés
Русский
Português
Deutsch
Italiano
Türk dili
Język polski
Nederlandse taal
Svenska
Čeština
suomi
Slovenský jazyk
1.5 Ton Crawler Excavator Truck
A 1.5-ton crawler excavator truck typically refers to a compact mini-excavator with a weight of about 1.5 tons (1,500 kg), mounted or paired with a truck for easier transportation and access to various construction sites. This setup offers several benefits, particularly for those in need of an efficient, portable, and versatile solution for light to medium excavation tasks. While the mini-excavator itself performs digging, trenching, and material-handling operations, the truck component allows for transport and mobility.
Mini Crawler Excavator (1.5-Ton):
Weight: The 1.5 Ton Crawler Excavator Truck itself weighs around 1.5 tons (1,500 kg). This compact size allows it to be maneuvered easily in tight spaces.
Tracks: Crawler tracks provide superior stability on uneven surfaces and soft soil. They also distribute weight more evenly than wheels, reducing the risk of sinking or damaging delicate surfaces like lawns or asphalt.
| Packaging | |
| Sticky Packing Size (Bucket Landing Position) (mm) | 2840*1000*2200mm |
| Packing size (closed position) (mm) | 2350*1000*2200mm |
| Wooden box size (mm) | 2857*1140*1698 |
| Packing | Wooden case |
| Product Information | |
| Product net weight (kg) | 880 |
| Gross weight with wooden box (kg) Wooden box weight 125kg | 1005 |
| Operating weight (kg) (net weight + load) | 1000 |
| Maximum load (kg) | 120 |
| Color | Orange + Black |
| Maximum traveling speed (km/h) | 2.5-3 |
| Rated slewing speed (rpm) | 11 |
| Fuel tank capacity (L) | 7 |
| Hydraulic oil tank capacity (L) | 14 |
| Fuel consumption (L/h) | 1.5L/h |
| Side Swing Angle | No function |
| Chassis telescopic function | No function |
| Awning way | Four-legged shed |
| Distribution position | Each cylinder oil pipe, each motor oil pipe |
| Number of steel wire layers | Double-layer steel wire |
| Peak pressure resistance value (Mpa) | ≥40 |
Digging Depth: Typically, the digging depth for a 1.5-ton excavator is between 2.0 to 2.5 meters (6.5 to 8 feet), depending on the model. This makes it suitable for trenching, landscaping, and light demolition work.
| Engine | |
| Engine Model | Bailiton Twin Cylinder 3864 |
| Engine power (hp) | 23hp |
| Rated speed (rpm) | 3600 |
| Engine type | Air-cooled four-stroke, OHV |
| Displacement (CC) | 627 |
| Engine Cylinder Form | V-twin, cast iron cylinder liner |
| Engine Bore (mm) | 75.5 |
| Engine Stroke (mm) | 70 |
| Engine oil capacity (L) | 1.7 |
| Engine net weight (kg) | 35 |
| Rated torque (N.m) | 47.5@3060 |
| Fuel type | Gasoline 90# and above |
| Oil type | 10-30 (W) |
| Cooling type | Air-cooled |
| Emission standard | EPA |
Reach: These excavators often have a reach of 3.5 to 4 meters (10 to 13 feet), allowing operators to access areas beyond the immediate reach of the machine itself.
| Control system | |
| Controls | Hydraulic pilot type on both sides |
| Chronographs | Yes |
| Voltmeter | No |
| Battery Voltage (V) | 12 |
| Battery Capacity (AH) | 45 |
| Battery Size (mm) | 238*130*200+20 (column height 20) |
| Battery Weight (kg) | 12 |
| Battery Positive Terminal Diameter (mm) | 19 |
| Battery Negative Terminal Diameter (mm) | 17 |
| Maximum starting current (A) | 380 |
| Main Pump | |
| Main Pump Model | PGP51063GLP |
| Main pump type | Duplex Gear Pumps |
| Rated pressure of main pump (Mpa) | 18 |
| Maximum pressure of main pump (Mpa) | 25 |
| Nominal flow rate of main pump (ml/r) | 6+3 |
| Hydraulic oil type | 46#Anti-wear hydraulic oil |
| Main pump flow rate (L/min) | 27L/min@3000rpm |
| Brand | Customized model |
| Model | Customized model |
| Rated pressure of main pump (Mpa) | 17.5 |
Excavator Truck Setup:
Truck Type: Typically, a flatbed or dump truck is used to carry the mini excavator. These trucks are equipped to transport the compact excavator to and from job sites. Some setups may involve a crane or loading ramp to lift and load the excavator onto the truck.
| walking system | |
| Model | BM6-310 |
| Type | Cycloid Motor |
| Gear | First gear |
| Function of oil unloading | No |
| Track material | Rubber |
| Track width (mm) | 180 |
| Pitch of track (mm) | 72 |
| Number of track sections | 37 |
| Number of supporting wheels | 2 |
| Airframe Configuration | |
| Roof form | Four-legged shed |
| Cabin heat insulation foam | Upper engine |
| Boom hydraulic pipe routing | Outer alignment |
| Boom cylinder mounting position | Lower side of big arm positively mounted |
| Fuel filling position | Under Seat |
| Hydraulic oil filling position | Footrest right side |
| Cabin door opening method | Upper side seat forward |
| Chassis hook | Chassis four hooks |
| Throttle valve | No throttle |
| Seat armrests | Without armrests |
| Seat belts | with |
| Anti-slip feet | with |
| Rubber skid cover for operating rod | Digging lever |
| Material of hydraulic pipe of big arm | Hose |
| Hydraulic Oil Heat Dissipation | Without hydraulic oil cooling |
| Engine cooling | Air Cooled |
Transport Ease: The truck makes it easy to move the excavator from one site to another, especially if the excavation tasks are spread over different areas. The truck may also serve as a mobile workshop for storing tools, materials, or attachments when not in use.
| Adaptability of aids | |
| Attachment link shaft diameter (mm) | 25 |
| Width of small arm end (mm) | 90 |
| Specification of reserved hydraulic connector | M16 male thread |
| Number of reserved hydraulic joints | 2 |
| Thumb Clamp Adaptation Form | Upper Single Hole Style |
| Outer width of mounting on the thumb clamp of small arm (mm) | 47 |
| Thumb clamp upper mounting hole opening distance (mm) | 47 |
| Small arm thumb clamp lower mounting hole width (mm) | 90 |
| Diameter of small arm thumb clamp hole (mm) | 25.5 |
| Vehicle Specifications | |
| Maximum length (mm) | 3750 |
| Bulldozer width (mm) | 1000 |
| Overall width (mm) (both sides of chassis hook) | 1060 |
| Overall track width (mm) | 1000 |
| Overall height cab top (mm) | 2250 |
| Track distance (mm) | 820 |
| Track length to ground (mm) | 885 |
| Track Length (mm) | 1230 |
| Standard (single) track width (mm) | 180 |
| Swivel platform ground clearance (mm) | 375 |
| Traveling Minimum Ground Clearance (mm) | 98 |
| Minimum turning radius (mm) | 1560 |
| Standard bucket volume (m3) | 0.025 |
| Standard bucket width (mm) | 400 |
Payload Capacity: The truck will need to have an adequate payload capacity to carry the weight of the 1.5-ton excavator and possibly additional tools, attachments, and supplies.
| Working Size | |
| Maximum digging force of bucket (KN) | 14.5 |
| Maximum load (kg) | 120 |
| Maximum digging depth (mm) | 1795 |
| Maximum vertical digging depth (mm) | 1595 |
| Maximum digging height (mm) | 2325 |
| Maximum unloading height (mm) | 1505 |
| Maximum digging radius (mm) | 2900 |
| Climbing capacity (°) | 30 |
| Maximum height of bulldozer (mm) | 310 |
| Maximum depth of bulldozer (mm) | 270 |
Power and Fuel Efficiency:
The mini excavator is powered by a small internal combustion engine, often in the range of 15 to 25 horsepower, which provides sufficient power for light excavation tasks. The combination of a small engine and compact size ensures fuel efficiency, making it ideal for projects requiring extended use.
The truck provides the transportation needed for the excavator but is typically powered by a separate engine suited for carrying heavier loads.
Related Products
Submitted successfully
We will contact you as soon as possible
Related News
Submitted successfully
We will contact you as soon as possible
