1.5 Ton Trench Machine Mini Excavator
A 1.5-ton small bagger digger machine is essentially a mini-excavator or compact crawler excavator, often referred to in some regions as a bagger (a term commonly used in parts of Europe for excavators). These small yet powerful machines are used for a variety of light to medium-duty digging, trenching, lifting, and material-handling tasks, particularly in tight spaces or for small-scale construction and landscaping projects.
1.5 Ton Trench Machine Mini Excavator Compact Size and Weight:
Weight: Typically around 1.5 tons (1,500 kg or ~3,300 lbs), making these machines much lighter and more compact compared to larger excavators.
Packaging | |
Wooden box size (mm) | 2980*1090*1600mm |
Packing method | Wooden box |
20GP | |
40GP |
Product Information | |
Net weight (kg) | 900 |
Gross weight with wooden box (kg) | 1070 |
Running weight (kg) | 1000 |
Maximum load (kg) | 120 |
Color | Orange + Black |
Maximum traveling speed (km/h) | 3 |
Slewing speed (rpm) | 11 |
Fuel tank capacity (L) | 6.6 |
Hydraulic oil tank capacity (L) | 12.7 |
Fuel consumption (L/h) | 1L/h |
Side Swing Angle | No function |
Chassis telescopic function | Without this function |
Awning way | Four-legged shed |
Dimensions: These small machines are designed to operate in confined spaces, often with a width of around 1 to 1.5 meters (39 to 59 inches), which allows them to maneuver in narrow areas like residential backyards or small urban lots.
Engine | |
Engine Model | Paragon Single Cylinder 25T2 |
Engine power (hp) | 13.5hp |
Rated speed (rpm) | 3060 |
Engine type | Air-cooled four-stroke, OHV |
Displacement (CC) | 420 |
Engine Cylinder Form | Single-cylinder, cast iron cylinder liner |
Engine Bore (mm) | 90 |
Engine Stroke (mm) | 66 |
Engine oil capacity (L) | 1.1 |
Engine net weight (kg) | 31 |
Rated torque (N.m) | 28.5@3060RPM |
Fuel type | Gasoline 95# and above |
Oil type | 10-30 (W) |
Cooling type | Air-cooled |
Emission standard | EPA |
Control system | |
Controls | Front Mechanical |
Chronographs | Yes |
Voltmeter | No |
Battery Voltage (V) | 12 |
Battery Capacity (AH) | 45 |
Battery Size (mm) | 224*117*175 |
Battery Weight (kg) | 12 |
Maximum starting current (A) | 380 |
main pump | |
Main Pump Model | PGP5106GLP |
Main pump type | Single Gear Pumps |
Rated pressure of main pump (Mpa) | 18 |
Maximum pressure of main pump (Mpa) | 25 |
Nominal flow rate of main pump (ml/r) | 6 |
Hydraulic oil type | 46#Anti-wear hydraulic oil |
Main pump flow rate (L/min) | 18L/min |
Better Maneuverability: Crawler systems allow the machine to turn 360 degrees in place, offering precision and control when working in confined spaces.
walking system | |
Model | BM6-310 |
Type | Cycloid motor |
Gear | First gear |
Function of oil unloading | No |
Track material | Rubber |
Track width (mm) | 180 |
Number of supporting wheels | 2 |
Airframe Configuration | |
Roof form | four-legged shed |
Cabin heat insulation foam | / |
Boom hydraulic pipe routing | Outer alignment |
Boom cylinder mounting position | Lower side of the big arm positively fitted |
Fuel filling position | Under Seat |
Hydraulic oil filling position | Seat Left |
Cabin door opening method | Flip the seat forward |
Chassis hook | / |
Throttle valve | Without throttle, throttle mounting holes reserved |
Seat armrests | With armrests |
Seat belts | with |
Anti-slip feet | with |
Rubber skid cover for operating rod | Digging lever |
Material of hydraulic pipe of big arm | Hose |
Hydraulic Oil Heat Dissipation | Without hydraulic oil radiator |
Engine cooling | Air Cooled |
Adaptability of aids | |
Attachment link shaft diameter (mm) | 25 |
Width of small arm end (mm) | 90 |
Specification of reserved hydraulic connector | M16 male thread |
Number of reserved hydraulic joints | 2 |
Thumb Clamp Adaptation Form | Top Single Hole Styles |
Outer width of mounting on the thumb clamp of small arm (mm) | 47 |
Thumb clamp upper mounting hole opening distance (mm) | 47 |
Small arm thumb clamp lower mounting hole width (mm) | 90 |
Diameter of small arm thumb clamp hole (mm) | 25.5 |
Crawler Tracks:
Stability: The continuous tracks give the machine superior stability, especially when working on soft, uneven, or muddy ground.
Vehicle Specifications | |
Maximum length (mm) | 4000 |
Transportation length (mm) | 2980 |
Overall width (mm) | 940 |
Overall track width (mm) | 930 |
Overall height cab top (mm) | 2270 |
Track distance (mm) | 750 |
Track length to ground (mm) | 885 |
Track Length (mm) | 1230 |
Standard (single) track width (mm) | 180 |
Swivel platform ground clearance (mm) | 410 |
Minimum ground clearance (mm) | 98 |
Minimum turning radius (mm) | 1505 |
Standard bucket volume (m3) | 0.025 |
Standard bucket width (mm) | 400 |
Working Size | |
Maximum digging force of bucket (KN) | 11.5 |
Maximum load (kg) | 120 |
Maximum digging depth (mm) | 1750 |
Maximum vertical digging depth (mm) | 1550 |
Maximum digging height (mm) | 2400 |
Maximum unloading height (mm) | 1590 |
Maximum digging radius (mm) | 3050 |
Climbing capacity (°) | 30 |
Maximum height of bulldozer (mm) | 320 |
Maximum depth of bulldozer (mm) | 200 |
Related Products
Submitted successfully
We will contact you as soon as possible
Related News
Submitted successfully
We will contact you as soon as possible