< >

1.5Ton Crawler Mini Digger Excavator Bagger

The digger is powered by a hydraulic system that controls the boom, arm, and bucket. This hydraulic power provides precision, ensuring smooth operation during digging, lifting, or trenching tasks.

Contact Now Telephone WhatsApp

Product Details

Digging Depth: A typical 1.5Ton Crawler Mini Digger Excavator Bagger can dig to a depth of around 2.0 to 2.5 meters (6.5 to 8 feet), which is suitable for light to moderate excavation tasks such as digging trenches or foundations.

Packaging
Wooden box size (mm)	298010901600mm
Packing method	Wooden box
20GP
40GP

Product Information
Net weight (kg)	900
Gross weight with wooden box (kg)	1070
Running weight (kg)	1000
Maximum load (kg)	120
Color	Orange + Black
Maximum traveling speed (km/h)	3
Slewing speed (rpm)	11
Fuel tank capacity (L)	6.6
Hydraulic oil tank capacity (L)	12.7
Fuel consumption (L/h)	1L/h
Side Swing Angle	No function
Chassis telescopic function	Without this function
Awning way	Four-legged shed

Reach: The arm and boom usually have a reach of approximately 3 to 4 meters (10 to 13 feet), allowing operators to access areas further from the machine while maintaining stability.

Engine
Engine Model	Paragon Single Cylinder 25T2
Engine power (hp)	13.5hp
Rated speed (rpm)	3060
Engine type	Air-cooled four-stroke, OHV
Displacement (CC)	420
Engine Cylinder Form	Single-cylinder, cast iron cylinder liner
Engine Bore (mm)	90
Engine Stroke (mm)	66
Engine oil capacity (L)	1.1
Engine net weight (kg)	31
Rated torque (N.m)	28.5@3060RPM
Fuel type	Gasoline 95# and above
Oil type	10-30 (W)
Cooling type	Air-cooled
Emission standard	EPA
Control system
Controls	Front Mechanical
Chronographs	Yes
Voltmeter	No
Battery Voltage (V)	12
Battery Capacity (AH)	45
Battery Size (mm)	224117175
Battery Weight (kg)	12
Maximum starting current (A)	380
main pump
Main Pump Model	PGP5106GLP
Main pump type	Single Gear Pumps
Rated pressure of main pump (Mpa)	18
Maximum pressure of main pump (Mpa)	25
Nominal flow rate of main pump (ml/r)	6
Hydraulic oil type	46#Anti-wear hydraulic oil
Main pump flow rate (L/min)	18L/min

Engine Power: These diggers usually have engines with power outputs ranging from 15 to 25 horsepower, providing sufficient power for small to medium excavation work.

walking system
Model	BM6-310
Type	Cycloid motor
Gear	First gear
Function of oil unloading	No
Track material	Rubber
Track width (mm)	180
Number of supporting wheels	2

Airframe Configuration
Roof form	four-legged shed
Cabin heat insulation foam	/
Boom hydraulic pipe routing	Outer alignment
Boom cylinder mounting position	Lower side of the big arm positively fitted
Fuel filling position	Under Seat
Hydraulic oil filling position	Seat Left
Cabin door opening method	Flip the seat forward
Chassis hook	/
Throttle valve	Without throttle, throttle mounting holes reserved
Seat armrests	With armrests
Seat belts	with
Anti-slip feet	with
Rubber skid cover for operating rod	Digging lever
Material of hydraulic pipe of big arm	Hose
Hydraulic Oil Heat Dissipation	Without hydraulic oil radiator
Engine cooling	Air Cooled

Adaptability of aids
Attachment link shaft diameter (mm)	25
Width of small arm end (mm)	90
Specification of reserved hydraulic connector	M16 male thread
Number of reserved hydraulic joints	2
Thumb Clamp Adaptation Form	Top Single Hole Styles
Outer width of mounting on the thumb clamp of small arm (mm)	47
Thumb clamp upper mounting hole opening distance (mm)	47
Small arm thumb clamp lower mounting hole width (mm)	90
Diameter of small arm thumb clamp hole (mm)	25.5

Fuel Efficiency: Thanks to their smaller engines, 1.5-ton mini excavators are fuel-efficient and cost-effective for projects that require extended or repeated use.

Vehicle Specifications
Maximum length (mm)	4000
Transportation length (mm)	2980
Overall width (mm)	940
Overall track width (mm)	930
Overall height cab top (mm)	2270
Track distance (mm)	750
Track length to ground (mm)	885
Track Length (mm)	1230
Standard (single) track width (mm)	180
Swivel platform ground clearance (mm)	410
Minimum ground clearance (mm)	98
Minimum turning radius (mm)	1505
Standard bucket volume (m3)	0.025
Standard bucket width (mm)	400

Working Size
Maximum digging force of bucket (KN)	11.5
Maximum load (kg)	120
Maximum digging depth (mm)	1750
Maximum vertical digging depth (mm)	1550
Maximum digging height (mm)	2400
Maximum unloading height (mm)	1590
Maximum digging radius (mm)	3050
Climbing capacity (°)	30
Maximum height of bulldozer (mm)	320
Maximum depth of bulldozer (mm)	200

What are your advantages compare with other manufactures?

1.Competitive Price-We a Chinese leading manufacturer of Wheel Excavators,Crawler Excavators, Forestry Harvester, electric loaders etc., all products are with good quality and competitive price.
2.Quick Response--Our team is consisted of a group of diligent and enterprising people working 24/7 to respond client inquiries and question all the time. Most problems can be solved within 12 hours.
3.Sole Agent wanted—You may apply our sole sales agent of our factory in your country, if there is no agent yet in your local area,to open your market working together.