< >

2 Ton Crawler Excavator Truck

Better Stability: The crawler tracks ensure better stability, especially on soft or uneven ground, compared to wheeled excavators.

Versatility: With a wide range of attachments available, it can be adapted to handle various tasks such as trenching, digging, demolition, and material handling.

Contact Now Telephone WhatsApp

Product Details

Ideal for Tight Spaces: 2 Ton Crawler Excavator Truck design allows for work in tight or urban areas where larger machines can’t operate. It’s perfect for small residential sites or urban construction areas with limited space.

Packaging
Packaging	Wooden box
Net weight of product(kg)	1400kg
Gross weight with wooden case (kg) Wooden case weight 150kg	1550kg
Running weight (kg) (net weight + load)	1480kg

Product Information
Product net weight (kg)	1400kg
Maximum load (kg)	120
Color	Orange + Black
Maximum traveling speed (km/h)	2.5-3
Rated slewing speed (rpm)	8-14
Fuel tank capacity (L)	19
Hydraulic oil tank capacity (L)	16.5
Fuel consumption (L/h)	1L/h
Side Swing Angle	Yes
Chassis telescopic function	No such function
Sunshade way	Four-legged shed

Transportable: Due to its relatively low weight, a 2-ton mini excavator can be easily transported to different job sites using standard flatbed trailers, making it cost-effective for short-term or multi-site jobs.

Engine
Engine Model	Kubota D722
Engine power (hp)	13.8hp
Rated speed (rpm)	2600
Engine type	Water-cooled four-stroke
Displacement (CC)	719
Engine Cylinder Form	Inline three-cylinder
Engine Bore (mm)	67
Engine Stroke (mm)	68
Engine oil capacity (L)	3.8
Engine net weight (kg)	63
Rated torque (N.m)	45@2600rpm
Fuel type	Diesel
Oil type	Refer to engine manual
Cooling type	Water-cooled
Emission standard	EPA

Control system
Controls	Hydraulic pilot type on both sides
Chronographs	Yes
Voltmeter	Yes
Battery Voltage (V)	12
Battery Capacity (AH)	45
Battery Size (mm)	238130200+20 (column height 20)
Battery Weight (kg)	12
Battery Positive Terminal Diameter (mm)	19
Battery Negative Terminal Diameter (mm)	17
Maximum starting current (A)	380

Compact Design:

Weighs approximately 2 tons (4,400 lbs).
Designed to fit through tight spaces, with a width typically around 1.3 to 1.6 meters (4.3 to 5.3 feet).

Main Pump
Main Pump Model
Main pump type	Duplex Gear Pumps
Rated pressure of main pump (Mpa)	18
Maximum pressure of main pump (Mpa)	25
Nominal flow rate of main pump (ml/r)	10+3
Hydraulic oil type	46#Anti-wear hydraulic oil
Main pump flow rate (L/min)	39L/min@3000rpm
multicircuit valve
Model	8-Link Liquid Control
Rated pressure of main pump (Mpa)	17.5

Crawler Tracks:

Provides enhanced stability on uneven or soft terrain.
Tracks distribute the machine's weight evenly, reducing ground pressure.

walking system
Model
Type	Cycloid motor
Gear	First gear
Function of oil unloading	None
Track material	Rubber
Track width (mm)	180
Pitch of track (mm)	72
Number of track sections	41
Number of supporting wheels	2

Airframe Configuration
Roof form	Four-legged shed
Cabin heat insulation foam	Upper engine
Boom hydraulic pipe routing	Internal alignment
Boom cylinder mounting position	Big arm upper side inverted
Fuel filling position	Right side leg
Hydraulic oil filling position	Right side leaning leg
Cabin door opening method	Upper side seat forward
Chassis hook	Without hook
Throttle valve	With throttle
Seat armrests	without armrest
Seat belts	with
Anti-slip feet	with
Rubber skid cover for operating rod	Digging lever
Material of hydraulic pipe of big arm	Hose
Hydraulic Oil Heat Dissipation	with hydraulic oil cooling
Engine cooling	with water cooling

Digging Capacity:

Digging Depth: Around 2.3 to 2.7 meters (7.5 to 8.9 feet).
Bucket Capacity: Typically ranges from 0.03 to 0.1 cubic meters (0.04 to 0.13 cubic yards).

Adaptability of aids
Attachment link shaft diameter (mm)	25
Width of small arm end (mm)	90
Specification of reserved hydraulic connector	M16 male thread
Number of reserved hydraulic joints	2
Thumb Clamp Adaptation Form	Upper Single Hole Style
Outer width of mounting on the thumb clamp of small arm (mm)	47
Thumb clamp upper mounting hole opening distance (mm)	27
Small arm thumb clamp lower mounting hole width (mm)	90
Diameter of small arm thumb clamp hole (mm)	25.5

Vehicle Specifications
Maximum length (mm)	4325
Bulldozer width (mm)	1100
Overall width (mm) (both sides of chassis hook)	1100
Overall track width (mm)	1000
Overall height cab top (mm)	2272
Track distance (mm)	920
Track length to ground (mm)	1050
Track Length (mm)	1545
Standard (single) track width (mm)	180
Swivel platform ground clearance (mm)	375
Traveling Minimum Ground Clearance (mm)	98
Minimum turning radius (mm)	1711
Standard bucket volume (m3)	0.025
Standard bucket width (mm)	400

Engine Power:

Powered by a 20-30 horsepower diesel engine, offering enough strength for light to moderate digging and lifting tasks.

working size
Maximum digging force of bucket (KN)	14.5
Maximum load (kg)	200
Maximum digging depth (mm)	2100
Maximum vertical digging depth (mm)	1850
Maximum digging height (mm)	2580
Maximum unloading height (mm)	1637
Maximum digging radius (mm)	3160
Climbing capacity (°)	30
Maximum height of bulldozer (mm)	310
Maximum depth of bulldozer (mm)	270

What logistics ways you can work for shipment?

We can ship construction machinery by various transportation tools.
1.For 90%of our shipment,we will go by sea.to all main continents such as South America,Middle East,Africa,Oceania and Europe etc.either by container or RoRo/Bulk shipment.
2.For neighborhood countries of China,such as Russia.Mongolia.Kazakhstan.Uzbekistan etc.,we can ship construction machinery by road or railway.
3.For light spare parts in urgent demand,we can ship it by international courier service,such as DHL,TNT UPS,or Fedex.

Leave your messages